Mazda Key Replacement in Denver

Our Mazda work includes mainly the CX-5 and Mazda3 models. The brand is unique in that it has a very clear distinction between its older style blade key and newer proximity fob. At last, phone quotes are a piece of cake! Car Key Replacement Denver CO will replace any of these keys right on site at the vehicle.

We provide new key fobs for all Mazda models including the Miata MX-5, CX-30, CX-50, CX-70, CX-90, CX-3, CX-5, CX-9, Mazda6 and Mazda3.

Which Mazda Key You Have

Older Mazdas use a bladed transponder key, sometimes with the remote buttons built into the head of it, and those are quick and inexpensive for us to produce. From mid decade onwards, the range was changed to the proximity fob Mazda offers under Advanced Keyless Entry. It combines the remote features along with the immobilizer identification in one fob, therefore both the components need to be programmed first.

The Fob That Only Works Up Close

By far the most frequent issue our customers have regarding their Mazdas concerns a fob that works for a range of one or two feet from the door handle and almost always this is not a case of the fob, but definitely a matter of the coin cell. In addition, it should be noted that Mazda makes it possible to start the car using the fob on the start button after draining the cell, which is not a mistake but rather purposeful behavior, meaning that the battery needs to be replaced..

Weekend Cars and Keys in a Drawer

Second cars create a problem entirely of their own, which is the spare key that has sat unused in a drawer for four years with a cell that over time died two years into that. If it is only available on an infrequent basis, it makes sense to have both the keys examined and the batteries replaced simultaneously rather than finding out the condition of the spare when it is most needed. If included with any other work, it is hardly anything at all.

Mazdas That Have Had a Flat Battery

Should the key fob fail to work after the jump starting or replacing of the battery of a Mazda vehicle, it is highly probable that the individual who carries out this procedure will be held accountable by the owner, however in all probability, nothing will be broken; the problem arises because of loss of memory of the receiver and the need to reprogram the fobs into the car system, an easy task that costs far less than purchasing a replacement. When both fobs fail together, this is definite proof of the problem being in the car.

Mazda keys and fobs are cut, programmed and tested at your car, contact our local service line with your license and registration ready.